apparel
With a maximum cutting height up to 80 mm (compressed under vacuum and depending on material) the Procut high ply cutter of bullmer is the right cutting solution for fashion and apparel if you want output, time savings and perfect quality.
In combination with the suitable spreading machine the Procut’s effectiveness is enhanced.
Hign-ply Cutter
Working width: 1800/2000/2200/2400 mm |
Cutting window length: 1800/2500/3500 mm (Any size available on demand) |
Optional models of high-ply cutter: D8002S, D8002, D8003 |
Vacuum unit: 15 KW (Any specification available on demand) |
Recommended supporting machine: Servo spreader: KW2000S (for both knit and woven fabric) Automatic spreader: W1800 (only for woven fabric) Automatic loader: TL2000 Automatic labeler: LM2100 Automatic conveyor table: Translay |
In the sample department and for small orders or special measure garments the Premiumcut single ply cutter is a good alternative. Through its high speed you process your material single ply straight from the roll of fabric.
Pattern matched fabrics, such as checks and stripes, are cut accurately by the Premiumcut in combination with the bullmer scanning system.
The advantage: With the Premiumcut single ply cutter you do not have to use a plastic foil to fix the material on the belt due to the use of electric rotary blade and notch tool.
It is also possible to save energy costs by using smaller vacuum pumps. There is also a big range of unwinding unit which you can choose regarding your material specifications.
Textile:
Working width: 1600/1800/2200 mm (the widest width can be 5000mm)
Cutting window length: 2000 mm (Any size available on demand)
First choice: Single-ply Cutter Premiumcut - conveyor
Optional: Medium-ply Cutter TURBOCUT D2502
Vacuum unit: 7.5 kW (Any specification available on demand)
Unwinding unit AWV-A with center drive and edge alignment
Automatic vacuum chamber sectioning
Optional: Material lager system TRANSROLL-P
Electric rotary knife Notch Module Drill Module
Leather
Working width: 1600/1800/2200mm (the widest width can be 5000mm) |
3 or 4 zone system |
PREMIUMCUT ELC – Conveyor |
Vacuum unit (e.g. 2 x 7,5 kW) Automatic vacuum chamber sectioning |
Leather Nesting Solution: RG Technologies Beamer solutions and automated solutions |
Electric rotary knife Electric oscillating knife Notch Module Drill Module
Optional:
Your time advantage by exchanging the material rolls:
Material Roll Magazine „Transroll-P“ in combination with the unwinding unit AWV-A with center drive.
Other unwinding units depending on material type and material characteristics are available as well.